Applications
R&S
®
RTM3000
182User Manual 1335.9090.02 ─ 09
Spectogram
Enables the spectrogram.
For details, see Chapter 9.3.2, "Spectrogram", on page 183.
Remote command:
SPECtrum:DIAGram:SPECtrogram[:ENABle] on page 557
Automatic RBW
If enabled, the instrument sets an appropriate value for the resolution bandwidth. If dis-
abled, you can set a manual value, see "RBW" on page 177.
Remote command:
SPECtrum:FREQuency:BANDwidth[:RESolution]:AUTO on page 556
Peak List
Enables the peak search, and displays the peak list and the markers.
For details, see Chapter 9.3.3, "Peak list and markers", on page 185.
Remote command:
SPECtrum:MARKer:RTABle:ENABle on page 550
Marker
Opens a menu to set up the markers and the peak list. The menu is only available if
"Peak List" is active.
For details, see Chapter 9.3.3, "Peak list and markers", on page 185.
Spectrum analysis and spectrogram (option R&S
RTM-K18)
To Next Page
Loading...
Need help?
General
