Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
649User Manual 1335.9090.02 ─ 09
<n> *
Selects the frame (1...n).
Return values:
<IdentifierValue> Decimal value
Usage: Query only
BUS<b>:CAN:FRAMe<n>:BSEPosition?
Returns the position of the bit stuffing error in the specified frame (if available).
Suffix:
<b>
.
1..4
<n> *
Selects the frame (1...n).
Return values:
<ErrorPosition> *RST: 0
Default unit: s
Usage: Query only
BUS<b>:CAN:FRAMe<n>:BCOunt?
Returns the number of data bytes in the specified frame.
Suffix:
<b>
.
1..4
<n> *
Selects the frame (1...n).
Return values:
<ByteCount> Number of words (bytes)
Usage: Query only
BUS<b>:CAN:FRAMe<n>:BYTE<o>:STATe?
Returns the state of the specified data byte.
Suffix:
<b>
.
1..4
<n> *
Selects the frame (1...n).
<o> *
Selects the byte number (1...m).
Return values:
<ByteStatus> OK | UNDF
UNDF: Undefined
Serial bus analysis