Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
798User Manual 1335.9090.02 ─ 09
STATus:QUEStionable:ADCState:ENABle........................................................................ 798
STATus:QUEStionable:LIMit:ENABle................................................................................799
STATus:QUEStionable:MASK:ENABle............................................................................. 799
STATus:QUEStionable[:EVENt]?......................................................................................799
STATus:QUEStionable:COVerload[:EVENt]?.....................................................................799
STATus:QUEStionable:ADCState[:EVENt]?...................................................................... 799
STATus:QUEStionable:LIMit[:EVENt]?..............................................................................799
STATus:QUEStionable:MASK[:EVENt]?........................................................................... 799
STATus:QUEStionable:NTRansition.................................................................................799
STATus:QUEStionable:COVerload:NTRansition................................................................ 799
STATus:QUEStionable:ADCState:NTRansition..................................................................799
STATus:QUEStionable:LIMit:NTRansition.........................................................................799
STATus:QUEStionable:MASK:NTRansition.......................................................................799
STATus:QUEStionable:PTRansition................................................................................. 800
STATus:QUEStionable:COVerload:PTRansition................................................................ 800
STATus:QUEStionable:ADCState:PTRansition..................................................................800
STATus:QUEStionable:LIMit:PTRansition......................................................................... 800
STATus:QUEStionable:MASK:PTRansition.......................................................................800
STATus:PRESet
Resets all STATUS:QUESTIONALBLE registers.
Usage:
Event
STATus:QUEStionable:CONDition?
STATus:QUEStionable:COVerload:CONDition?
STATus:QUEStionable:ADCState:CONDition?
STATus:QUEStionable:LIMit:CONDition?
STATus:QUEStionable:MASK:CONDition?
Returns the contents of the CONDition part of the status register to check for question-
able instrument or measurement states. Reading the CONDition registers does not
delete the contents.
Return values:
<Condition> Condition bits in decimal representation
Range: 0 to 65535
Increment: 1
Usage: Query only
STATus:QUEStionable:ENABle <Enable>
STATus:QUEStionable:COVerload:ENABle <Enable>
STATus:QUEStionable:ADCState:ENABle <Enable>
Status reporting