Operation
Lifter
263 / 564
Activate automatic share depth adjustment mode (optional)
The function of automatic share depth adjustment is optional. If this function is avail-
able, the switch field "AUTO" (5) is displayed, otherwise it is missing.
with automatic share depth adjustment without automatic share depth
adjustment
The share depth of the individual rows can be automatically adjusted to compensate
for uneven ground within the working width. An angle sensor (16), which sends the
signal for adjustment of the share depth, is mounted on every scalper.
If the adjacent warning icon appears on the R-Touch, a scalper cannot swing down
completely. This is generally caused by foreign objects in the area of the scalper
blade.
To Next Page
Loading...