Siemens Hipath 5000 - Page 1077

pcodes.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
A-19
System Programming Codes (Expert Mode Codes)
22 29 Feature Identification Number (FIN) for Conference (U.S. only)
22 30 Feature Identification Number (FIN) for Drop (U.S. only)
22 31 MSN default: 0 = off, 1 = on
22 32 DTMF hidden: 0 = off, 1 = on
22 33 Announcement with connection: 0 = denied, 1 = allowed
22 34 MFC-R2 parameters
22 34 1 Ringback protection
22 34 2 DID digits
22 35 Common hold
22 35 1 By hanging up
22 35 2 Without hanging up
22 36 Switch line, DSS: 0 = no, 1 = yes
(Status 1 = U.S., Status 0 = Rest of World (ROW)
22 37 Advisory call 0 = off, 1 = on
22 38 Trace stop facility
22 38 1 Stop trace
22 38 1 01 Assistant: 0 = inactive, 1 = active
22 38 1 09 HW: 0 = inactive, 1 = active
22 38 1 12 Processor: 0 = inactive, 1 = active
22 38 1 15 APSXF: 0 = inactive, 1 = active
22 38 1 16 General: 0 = inactive, 1 = active
(error 19 cannot be set to inactive)
22 38 1 20 CP: 0 = inactive, 1 = active
22 38 1 21 DH: 0 = inactive, 1 = active
22 38 1 23 Network: 0 = inactive, 1 = active
22 38 1 26 Presence 0 = inactive, 1 = active
22 38 1 28 Recovery: 0 = inactive, 1 = active
22 38 1 29 IO Process: 0 = inactive, 1 = active
22 38 1 30 LW: 0 = inactive, 1 = active (0 to n)
22 38 1 11 LW date: 0 = inactive, 1 = active (41 to n)
22 38 2 Reset: 1 = Delete all/2 = System default
Table A-3 Expert Mode Codes
Code Function