Siemens SINUMERIK Series Function Manual

N3: Software cams, position switching cycles - only 840D sl
8.5 Supplementary Conditions
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
553
8.5 Supplementary Conditions
Availability of function "Software cams, position switching signals"
The function is an option ("position-switching signals/cam controller"), which must be
assigned to the hardware through the license management.
8.6 Data lists
8.6.1 Machine data
8.6.1.1 General machine data
Number Identifier: $MN_ Description
10260 CONVERT_SCALING_SYSTEM Basic system switchover active
10270 POS_TAB_SCALING_SYSTEM System of measurement of position tables
10450 SW_CAM_ASSIGN_TAB[n] Assignment of software cams to machine axes
10460 SW_CAM_MINUS_LEAD_TIME[n] Lead or delay time on minus cams 1 -16
10461 SW_CAM_PLUS_LEAD_TIME[n] Lead or delay time on plus cams 1 -16
10470 SW_CAM_ASSIGN_FASTOUT_1 Hardware assignment for output of cams
1 -8 to NCK I/Os
10471 SW_CAM_ASSIGN_FASTOUT_2 Hardware assignment for output of cams
9 -16 to NCK I/Os
10472 SW_CAM_ASSIGN_FASTOUT_3 Hardware assignment for output of cams
17 -24 to NCK I/Os
10473 SW_CAM_ASSIGN_FASTOUT_4 Hardware assignment for output of cams
25 -32 to NCK I/Os
10480 SW_CAM_TIMER_FASTOUT_MASK Screen form for output of cam signals via timer
interrupts to NCU
10485 SW_CAM_MODE Response of SW cams

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD