Siemens SINUMERIK Series Function Manual

P2: Positioning axes
10.8 Response with special functions
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
635
10.8 Response with special functions
10.8.1 Dry run (DRY RUN)
The dry run feedrate is also effective for positioning axes unless the programmed feedrate is
larger than the dry run feedrate.
Activation of the dry run feed entered in SD42100 $SA_DRY_RUN_FEED can be controlled
with SD42101 $SA_DRY_RUN_FEED_MODE. See
References:
Function Manual, Basic Functions; Feedrates (V1)
10.8.2 Single block
Positioning axis type 1
Single-block mode is effective with positioning axes of type 1.
Positioning axis type 2
Positioning axes of type 2 also continue across block limits in single block mode.
Positioning axis type 3
Positioning axes of type 3 also continue across block limits in single block mode.

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD