N4: Own channel - only 840D sl
9.4 Automatic path segmentation
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
579
Program code Comment
N170 G02 G91 X-62.5 Y62.5 I0 J62.5 SON ; Incremental circular interpolation with
; interpolation parameters, nibbling
; activating
N180 G00 G90 Y300 SPOF ; Positioning
9.4.3 Response in connection with single axes
MD26016
The path of single axes programmed in addition to path axes is distributed evenly among the
generated intermediate blocks as standard.
In the following example, the additional rotary axis C is defined as a synchronous axis.
If this axis is programmed additionally as a "Punch-nibble axis":
MD26010 $MC_PUNCHNIB_AXIS_MASK = 1,
, then the behavior of the synchronous axis can be varied as a function of machine data:
MD26016 $MC_PUNCH_PARTITION_TYPE
.
Programming example:
Program code
N10 G90 G1 PON X10 Y10 C0 F10000
N20 SPP=5 X25 C45
N30 G3 SPN=3 X35 Y20 I0 J10 C90
To Next Page
Loading...
Need help?
General
