Siemens SINUMERIK Series Function Manual

Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
801
W4: Grinding-specific tool offset and tool monitoring
17
Contents
The topics of this functional description are:
● Grinding-specific tool offset
● Online tool offsets (continuous dressing)
● Grinding-specific tool monitoring
● Constant grinding wheel peripheral speed (GWPS)
References
For fundamentals see:
● Function Manual Basic Functions; Tool Offset (W1)
Programming, mode of operation and handling, please refer to:
● Programming Manual, Fundamentals
17.1 Tool offset for grinding operations
17.1.1 Structure of tool data
Grinding tools
Grinding tools are tools of types 400 to 499.
Tool offset for grinding tools
Grinding tools normally have specific tool and dresser data in addition to cutting edge data.
The specific grinding wheel data for the left and right wheel geometry can be stored under a
T number in
D1 and D2.
If data are needed for the dresser geometry, they can be stored, e.g., starting at
D3 of a T
number or in additional cutting-edge-specific data
(MD18096 $MN_MM_NUM_CC_TOA_PARAM).

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD