Siemens SINUMERIK Series Function Manual

A4: Digital and analog NCK I/Os for SINUMERIK 840D sl
1.4 Data lists
Extended Functions
68 Function Manual, 03/2013, 6FC5397-1BP40-3BA1
1.4 Data lists
1.4.1 Machine data
1.4.1.1 General machine data
Number Identifier: $MN_ Description
10300 FASTIO_ANA_NUM_INPUTS Number of active analog NCK inputs
10310 FASTIO_ANA_NUM_OUTPUTS Number of active analog NCK outputs
10320 FASTIO_ANA_INPUT_WEIGHT Weighting factor for analog NCK inputs
10330 FASTIO_ANA_OUTPUT_WEIGHT Weighting factor for analog NCK outputs
10350 FASTIO_DIG_NUM_INPUTS Number of active digital NCK input bytes
10360 FASTIO_DIG_NUM_OUTPUTS Number of active digital NCK output bytes
10362 HW_ASSIGN_ANA_FASTIN Hardware assignment of external analog NCK inputs
10364 HW_ASSIGN_ANA_FASTOUT Hardware assignment of external analog NCK outputs
10366 HW_ASSIGN_DIG_FASTIN Hardware assignment of external digital NCK inputs
10368 HW_ASSIGN_DIG_FASTOUT Hardware assignment of external digital NCK outputs
10394 PLCIO_NUM_BYTES_IN Number of directly readable input bytes of the PLC I/Os
10395 PLCIO_LOGIC_ADDRESS_IN Start address of the directly readable input bytes of the PLC I/Os
10396 PLCIO_NUM_BYTES_OUT Number of directly writeable output bytes of the PLC I/Os
10397 PLCIO_LOGIC_ADDRESS_OUT Start address of the directly writeable output bytes of the PLC
I/Os
10398 PLCIO_IN_UPDATE_TIME Update time for PLC I/O input cycle
10399 PLCIO_TYPE_REPRESENTATION Little-/big-endian representation for PLC I/O
10500 DPIO_LOGIC_ADDRESS_IN Logical slot address of the PROFIBUS I/O
10501 DPIO_RANGE_LENGTH_IN Length of the PROFIBUS I/O range
10502 DPIO_RANGE_ATTRIBUTE_IN Attributes of the PROFIBUS I/O
10510 DPIO_LOGIC_ADDRESS_OUT Logical slot address of the PROFIBUS I/O
10511 DPIO_RANGE_LENGTH_OUT Length of the PROFIBUS I/O range
10512 DPIO_RANGE_ATTRIBUTE_OUT Attributes of the PROFIBUS I/O
10530 COMPAR_ASSIGN_ANA_INPUT_1 Hardware assignment of NCK analog inputs for comparator byte
1
10531 COMPAR_ASSIGN_ANA_INPUT_2 Hardware assignment of NCK analog inputs for comparator byte
2
10540 COMPAR_TYPE_1 Parameterization for comparator byte 1
10541 COMPAR_TYPE_2 Parameterization for comparator byte 2

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD