Siemens SINUMERIK Series Function Manual

K5: Mode groups, channels, axis interchange
5.6 Data lists
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
345
Number Identifier: $MC_ Description
22240 AUXFU_F_SYNC_TYPE Output timing of F functions
22250 AUXFU_D_SYNC_TYPE Output timing of D functions
22260 AUXFU_E_SYNC_TYPE (available soon) Output timing of E functions
22400 S_VALUES_ACTIVE_AFTER_RESET S function active after RESET
22410 F_VALUES_ACTIVE_AFTER_RESET F function active after reset
22500 GCODE_OUTPUT_TO_PLC G functions to PLC
22550 TOOL_CHANGE_MODE New tool offset for M function
22560 TOOL_CHANGE_M_CODE M function for tool change
Channel-specific memory settings
Number Identifier: $MC_ Description
25000 REORG_LOG_LIMIT Percentage of IPO buffer for log file enable
28000 MM_REORG_LOG_FILE_MEM Memory size for REORG (DRAM)
28010 MM_NUM_REORG_LUD_MODULES Number of blocks for local user variables for REORG (DRAM)
28020 MM_NUM_LUD_NAMES_TOTAL Number of local user variables (DRAM)
28030 MM_NUM_LUD_NAMES_PER_PROG Number of local user variables per program (DRAM)
28040 MM_LUD_VALUES_MEM Memory size for local user variables (DRAM)
28050 MM_NUM_R_PARAM Number of channelspecific R parameters (SRAM)
28060 MM_IPO_BUFFER_SIZE Number of NC blocks in IPO buffer (DRAM)
28070 MM_NUM_BLOCKS_IN_PREP Number of blocks for block preparation (DRAM)
28080 MM_NUM_USER_FRAMES Number of settable Frames (SRAM)
28090 MM_NUM_CC_BLOCK_ELEMENTS Number of block elements for compile cycles (DRAM)
28100 MM_NUM_CC_BLOCK_USER_MEM Size of block memory for compile cycles (DRAM)
28500 MM_PREP_TASK_STACK_SIZE Stack size of preparation task (DRAM)
28510 MM_IPO_TASK_STACK_SIZE Stack size of IPO task (DRAM)
5.6.1.3 Axis/spindlespecific machine data
Number Identifier: $MA_ Description
30460 BASE_FUNCTION_MASK Axis functions
30550 AXCONF_ASSIGN_MASTER_CHAN Reset position of channel for axis change
30552 AUTO_GET_TYPE Definition of automatic GET
30600 FIX_POINT_POS Fixed value positions of axes with G75
32074 FRAME_OR_CORRPOS_NOTALLOWED Frame or HL offset are not allowed
33100 COMPRESS_POS_TOL Maximum deviation with compensation

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD