Appendix
A.1 List of abbreviations
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
911
I
I Input
I/O Input/Output
ENC Encoder: Actual value encoder
EFP Compact I/O module (PLC I/O module)
ESD Electrostatic Sensitive Devices
EMC ElectroMagnetic Compatibility
EN European standard
EnDat Encoder interface
EPROM Erasable Programmable Read Only Memory: Erasable, electrically programmable
read-only memory
ePS Network Services Services for Internet-based remote machine maintenance
EQN Designation for an absolute encoder with 2048 sine signals per revolution
ES Engineering System
ESR Extended Stop and Retract
ETC ETC key ">"; softkey bar extension in the same menu
F
FB Function Block (PLC)
FC Function Call: Function Block (PLC)
FEPROM Flash EPROM: Read and write memory
FIFO First In First Out: Memory that works without address specification and whose data is
read in the same order in which they was stored
FIPO Fine interpolator
FPU Floating Point Unit: Floating Point Unit
CRC Cutter Radius Compensation
FST Feed Stop: Feedrate stop
FBD Function Block Diagram (PLC programming method)
FW Firmware
G
GC Global Control (PROFIBUS: Broadcast telegram)
GEO Geometry, e.g. geometry axis
GIA Gear Interpolation dAta: Gear interpolation data
GND Signal Ground
GP Basic program (PLC)
GS Gear Stage
GSD Device master file for describing a PROFIBUS slave
To Next Page
Loading...
