Simrad ES80 - Selecting Measurement Units

406273/C
149
2SelectColourSetup.
3Selectthenumberofcoloursyouwanttouse.
Note
Ifyouwanttoapplyoneofthepredenedcolourscales,youmustselect64colours.
4Selectthecolourscaleyouwanttouse.
5Atthebottomofthedialogbox,selectApplytopreviewyourchoice(s).
6SelectOKtosavetheselectedsettingandclosethedialogbox.
Selectingmeasurementunits
TheES80ispreparedtoworkwithseveralinternationalstandardsforunitsof
measurements.ThechoicesontheUnitspageallowyoutocontrolwhichunitsof
measurementsthatareused.
Context
TheES80userinterfacepresentsmanymeasurements.Thesemeasurementsarefor
examplerelatedtodepth,rangeordistance.UsetheUnitsoptionstoselecttheunitsof
measurementsyouwishtoworkwith.TheES80usestheseinallpresentations.You
onlyneedtodenetheseonce.
Note
WhenyouworkintheInstallationdialogbox,youmustalwaysselectApplytosavethe
changesmadeonapage.Youmustdothisbefore
youcontinueworkingonadifferent
page.
Procedure
1OpentheSetupmenu.
2OntheSetupmenu,selectInstallation.
ObservethattheInstallationdialogboxopens.Thisdialogboxcontainsanumber
ofpagesselectedfromthemenuontheleftside.
3OntheleftsideoftheInstallationdialogbox,selectUnits.
ObservethattheUnitspageopens.
4Adjustthesettingtotyourrequirements.
5Atthebottomofthepage,selectApplytosaveyoursettings.
Operatingprocedures