Simrad ES80 - Checking the Current Software Version

406273/C
189
Procedure
1OntheProcessorUnit,closetheES80program.
2OpentheNetworkandSharingCenterdialogbox.
aInthebottom-leftcornerofyourdesktop,selecttheWindows
®
Startbutton.
bOntheright-handsideoftheStartmenu,selectControlPanel.
cObservethattheControlPanelopens.
dSelectNetworkandSharingCenter.
(IftheControlPanelisshownwithcategories,selectViewnetworkstatusand
tasks.)
eOntheleft-handmenu,selectChangeadaptersettings.
fClickonceonyournetworkadaptertoselectit,thenright-clickandselect
Propertiesontheshortcutmenu.
gOnthelistofconnections,selectInternetProtocol4(TCP/IPv4),andthen
Properties.
3SelectUsethefollowingIPaddress,andtypetheIPaddressandnetworkmask.
•IPAddress:157.237.15.12(Recommended)
•Subnetmask:255.255.255.0
YoucanleaveSubnetmaskblankandselectOK.Whenyouseeanerrormessage
sayingthatthemessagesubnetmaskismissing,selectOKagain.Adefaultsubnet
maskisthenautomaticallygenerated.
4SelectOKtosavetheselectedsettings,andthencloseallthedialogboxes.
Furtherrequirements
IfyoulaterneedtochangetheIPaddress,alwaysrestartthetransceiverbeforeyou
starttheES80.
Checkingthecurrentsoftwareversion
EveryES80softwarereleaseisuniquelyidentied.Youcaneasilyidentifyyourcurrent
softwareversionandtherelevantreleaseinformationintheAboutdialogbox.
Context
TheES80programisreleasedwithaspecicsoftwareversion.TheAboutdialogbox
displaysthecurrentversionnumber.TheversiondescribedinthisReferenceManualis
1.3.x.
IfyouwishtondthelatestsoftwareversionfortheES80,checkourwebsite.
•https://www.simrad.com
Operatingprocedures