Simrad ES80 - Page 358

356
406273/C
Serialnumber
Thisistheserialnumberofthetransceiver.Thisnumberisxedandcannotbe
changed.
Tip
ThisinformationisalsofoundintheBITE(Built-InTestEquipment)dialogbox.
YouopentheBITEdialogboxfromtheSetupmenu.
Channelnumber
Eachtransceivermayhaveoneormoretransducersconnected.Thisdigitidenties
eachofthesetransceiver/transducerchannels.Youcannotchangethisinformation.
Ifyouusesplit-beamtransducers,youwillonlyhaveonetransduceroneach
transceiver.Thechannelnumberwillthenalwaysbeone-1-.
Transducername
Thiscolumnidentiesthetransducerthatisconnectedtothetransceiver.The
nameshownistheCustomnameyoudenedwhenyouaddedthetransducertothe
ES80congurationusingtheTransducerInstallationpage.
WhenyousetuptheES80foruse,selectthetransducerfromthelist.
Note
Youcanonlyselectfromthetransducersthatyouhavepreviouslyinstalledonthe
TransducerInstallationpage.
Transducermodel
Thetransducermodelisidentied.Inmostcases,thisistheactualproductname
ofthetransducer.Youarenotabletochangethisinformation.
Status
Thecurrentstatusofthechannelisshown.
•Busy:Thechannelisalreadyinuse,probablybyanotherechosounderonthe
samenetwork.Youcannotconnecttothischannel.
•Installed:ThischannelisconnectedtoyourES80system.
•Lost:Thischannelcannotbeused.
•Available:Thischannelisvacantandreadyforuse.
Mux
Inthiscontext"Mux"meansMultiplexer.
CertaintransceiversfortheES80supportmultiplexedoutputs.Whenapplicable,a
tickboxappearsinthechannellisttoenablethemultiplexingfunctionality.
Selectthetickboxtoexpandthechannellistingtoincludetheadditionalchannels,
transducernamesandtransducermodels.
SimradES80ReferenceManual