114 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
To back up the configuration data of IOC to a remote site, which is an SFTP server
with the IP address of 172.16.33.33, id: tp5000, password: backup, with a file name
for backup data of “tp5k_ioc_backup.txt”:
tp5000> set configuration backup remote ioc
tp5k_ioc_backup.txt sftp:172.16.33.33 tp5000
Enter the password at the prompt and press Enter:
Password: backup
Example 6:
To restore the configuration data with a file name of tp5k_ioc_backup.txt for IOC
from a remote site, which is an SFTP server with the IP address of 172.16.33.33, id:
tp5000, password: backup:
tp5000> set configuration restore remote ioc
tp5k_ioc_backup.txt sftp:172.16.33.33 tp5000
Enter the password at the prompt and press Enter:
Password: backup
Example 7:
To back up the configuration data for an expansion shelf with ID=6 to a remote site,
which is an SFTP server with the IP address of 172.16.33.33, id: tp5000, password:
backup, with a file name for backup data of “tp5k_exp6_backup.txt”:
tp5000> set configuration backup remote exp6
tp5k_exp6_backup.txt sftp:172.16.33.33 tp5000
Enter the password at the prompt and press Enter:
Note: For remote storage, path names should be specified as
appropriate for the FTP/SFTP server and the operating system it is
running on. This includes whether the entire path should be specified
and whether "/" or "\" characters should be used.
Note: For remote storage, path names should be specified as
appropriate for the FTP/SFTP server and the operating system it is
running on. This includes whether the entire path should be specified
and whether "/" or "\" characters should be used.
Note: For remote storage, path names should be specified as
appropriate for the FTP/SFTP server and the operating system it is
running on. This includes whether the entire path should be specified
and whether "/" or "\" characters should be used.
To Next Page
Loading...
Need help?
General
