Symmetricom TimeProvider 5000 User Manual

186 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
set output-10m holdover {on|squelch}
Example 1:
To Enable the 10MHz output port 
tp5000> set output-10m state enable
Example 2:
To provision the output behavior to squelch during the warm-up state for the
dedicated 10MHz output port:
tp5000> set output-10m warm-up squelch
Example 3:
To provision the output behavior to squelch during the free-run state for the
dedicated 10MHz output port:
tp5000> set output-10m free-run squelch
Example 4:
To provision the output behavior to ON during the fast-track state for the dedicated
10MHz output port:
tp5000> set output-10m fast-track on
Example 5:
To provision the output behavior to ON during the holdover state for the dedicated
10MHz output port:
tp5000> set output-10m holdover on
Level : Config and Admin only

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English