Symmetricom TimeProvider 5000 User Manual

206 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
set ptp max-client {ioc1-1 | ioc1-2} <max-client value>
 To provision the announce limit, the minimum interval (maximum rate) between
PTP announce messages:
set ptp announce-limit {ioc1-1 | ioc1-2} <announce-limit
value>
– The interval is 2
z
seconds, where z= <announce-limit-value>.
 To provision the synchronization limit, the minimum interval (maximum rate)
between PTP synchronization messages:
set ptp sync-limit {ioc1-1 | ioc1-2} <sync-limit value>
– The interval is 2
z
seconds, where z= <sync-limit-value>.
 To provision the delay limit, the minimum interval (maximum rate) between PTP
delay response messages:
set ptp delay-limit {ioc1-1 | ioc1-2} <delay-limit value>
– The interval is 2
z
seconds, where z= <delay-limit-value>.
 To provision the PTP priority-1:
set ptp priority-1 {ioc1-1 | ioc1-2 | exp[0-9]} <priority-1
value>
 To provision the PTP priority-2:
set ptp priority-2 {ioc1-1 | ioc1-2 | exp[0-9]} <priority-2
value>
 To provision the PTP domain:
set ptp domain {ioc1-1 | ioc1-2 | exp[0-9]} <domain-value>
 To provision the PTP Diffserv Code Point value:
set ptp dscp ioc1-[y] <dscp-value>
 To provision the PTP Diffserv Code Point state:
set ptp dscp-state ioc1-[y] {enable | disable}
 To provision the PTP dither:
set ptp dither {ioc1-1 | ioc1-2 | exp[0-9]} {enable |
disable}
 To provision the PTP master Clock ID:
set ptp clockid {ioc1-1 | ioc1-2 | exp[0-9]} <clockid>
where the Clock ID is in the form xx:xx:xx:xx:xx:xx:xx:xx

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English