Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 243
Chapter 3
TimeProvider 5000 CLI Command Set
set snmp delete trapuser george3
Example 5:
To delete SNMP manager at IP address 192.168.5.177:
tp5000> set snmp delete manager 192.168.5.177
Example 6:
To set the trap version to SNMP v3:
tp5000> set snmp trapversion 3
Example 7:
To enable SNMP v2 on the TP5000:
tp5000> set snmp state-v2 enable
Example 8:
To set the sys-obj MIB to version 2.0:
tp5000> set snmp sys-obj-mib 2.0
Example 9:
To set the trap MIB to version 2.0:
tp5000> set snmp trap-mib 2.0
Level : Admin only

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English