6 Field-IQ crop input control setup Row Crop Seed setup
Delay Settings Explanation
Low Alarm Amount of time that the row sensor population has to be
below the Low Alarm setting before warning.
Singulation Low Amount of time that the singulation has to be below the
Singulation Alarm setting before warning.
Seeds When Off Amount of time that the Seeds When Off setting is above the
Seeds When Off Alarm setting before warning.
No Seeds When On Amount of time that the Seeds When On is above the No
Seeds When On Alarm setting before warning.
Blockage Alarm Amount of time that the Blockage Alarm is outside the Alarm
setting before warning.
c.
Thresholds
Threshold Setting Explanation
Skips Threshold If no seeds fall within the percentage of theoretical seed
placement, it is considered a Skip.
Multiples Threshold If two or more seeds fall within the percentage of the
theoretical seed placement, it is considered a Multiple.
Average Sample Size The number of seeds used to calculate the averages.
Misplaced Seeds
Threshold
If seeds fall outside of this percentage from the theoretical
seed placement, they are considered misplaced and will
reduce the spacing quality.
Population Adjustment Adjusts the population reading of the seed sensors,
independent of the Rate Population.
d.
Population Adjustment
Set the Population Adjustment Percentage. In most cases, this setting will be 0%. (This
feature is for Higher Population Planting.)
7.
At the Operation Setup screen, enter the correct settings and tap when finished.
126 CFX-750 Display User Guide Version 7.0, Revision A
To Next Page
Loading...
