x WorkCentre 3210/3220 Multifunction Printer Service Manual
Moving the Printer
Parts of the printer are hot. Wait at least 30 minutes for the printer to cool
before moving or packing the printer.
Back injury could result if you do not lift the printer properly.
■ The printer can be lifted by one person. Use safety lifting and handling
techniques when moving the printer.
■ Always move the printer separately from Tray 2.
When shipping the printer, repack the printer using the original packing
material and boxes or a Xerox packaging kit. Instructions for repacking the
printer are included in the kit. If you do not have all the original packaging, or
are unable to repackage the printer, contact your local Xerox service
representative.
Failure to properly repackage the printer for shipment can result in damage to
the printer. Damage to the printer caused by improper packaging is not
covered by the Xerox warranty, service agreement, or Total Satisfaction
Guarantee.
To Next Page
Loading...
