Xerox WORKCENTRE 3210 Service Manual

WorkCentre 3210/3220 Multifunction Printer Service Manual 5-17
Print-Quality Troubleshooting
Ghosting (3)
There is ghosting at 62.8 mm or 77.6 mm intervals. Fuser operating
temperature is too high.
Initial Actions
■ Ensure there are no debris in the Fuser.
■ Verify the paper is within the printer specifications (refer to “Media and
Tray Specifications” on page 1-18).
Warning
Allow the Fuser to cool before starting the procedure.
Troubleshooting Reference Table
Applicable Parts Example Print
■ Fuser, PL8.0.0
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the Fuser.
Is there any contamination on the
Fuser?
Clean the Fuser. Replace the
Fuser (
8-13).
s3210mfp-205
GHOSTING
GHOSTING
GHOSTING
GHOSTING
62.8 or 77.6 mm

Xerox WORKCENTRE 3210 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 24 ppm
Duplex Printing	Manual
Monthly Duty Cycle	Up to 30, 000 pages
Processor Speed	360 MHz
Memory	128 MB
Standard Paper Capacity	250 sheets
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, B5, Executive, Folio, Legal, Letter
Scan Resolution	Up to 4800 x 4800 dpi
Maximum Paper Size	8.5 x 14 in (Legal)
Operating System Compatibility	Windows, Mac OS
Print Resolution	600 x 600 dpi