1-2 WorkCentre 3210/3220 Multifunction Printer Service Manual
General Information
Printer Introduction and Overview
The Xerox WorkCentre 3210/3220 Multifunction Printer has a single-pass
laser design architecture, which offers mono print speed up to 24 or 28 pages
per minute (ppm), and resolution up to 1200 x 1200 dots-per-inch (dpi) image
quality. The printer supports PostScript 3 and PCL 6 for Base and Network
configurations.
The WorkCentre 3210/3220 provides a standard 250-Sheet, input tray. The
manual feeder holds 1 sheet. The manual feeder supports specialty media,
card stock, and envelopes. The output tray holds 50 sheets facedown.
Available options add memory, media capacity, and functionality:
â– Memory upgrades are available to increase from 128 MB standard RAM
up to 384 MB maximum.
â– An Optional Tray Assembly adds 250 sheets of input storage.
Technical Support Information
The Xerox WorkCentre 3210/3220 Multifunction Printer Service Manual is the
primary document used for repairing, maintaining, and troubleshooting the
printer.
To ensure complete understanding of this product, participation in Xerox
WorkCentre 3210/3220 Service Training is strongly recommended. To service
this product, Xerox certification for this product is required.
For updates to the Service Manual, Service Bulletins, knowledge base, etc.,
go to:
â– Xerox Global Service Net: https://www.xrxgsn.com/secure/main.pl
â– Service Partners: http://www.office.xerox.com/partners
For further technical support, contact your assigned Xerox Technical Support
for this product.
To Next Page
Loading...
Need help?
General
