Xerox WORKCENTRE 3210

1-18 WorkCentre 3210/3220 Multifunction Printer Service Manual
General Information
Warm-Up Time
Warm-up Time is defined as the time when the printer changes from Power-
On to Standby mode.
■ From Power On (UI Ready): Less than 54 seconds
■ From Power On (First Page Print): Less than 17 seconds
Image Specifications
Note
The printer produces a 4 mm margin on all sides. Edge-to-edge printing is
not available.
Print Margins
Print Area Margin
Guaranteed Print
Quality Area
Paper Width (A+B) A = Left Margin 4.23 mm
B = Right Margin 4.23 mm
Paper Length
(C+D)
C = Top Margin 4.23 mm
D = Bottom Margin 4.23 mm
Maximum 3 mm from edge of paper
Characteristic Specifications
Skew
Vertical
■ ±2.0 mm (Tray 1) / 241.3 mm
(Based on 0.0082 mm/mm)
■ ±2.5 mm (Duplex, SCF) / 241.3 mm
(Based on 0.0103 mm/mm)
■ ±3.5 mm (ADF) / 241.3 mm
(Based on 0.0103 mm/mm)
Horizontal
■ ±1.5 mm (Tray 1: ± 2.0 mm) / 177.8 mm
(Based on 0.0084mm/mm)
■ ±2.0 mm (Duplex, SCF) / 177.8 mm
(Based on 0.0112mm/mm)
■ ±2.5 mm (ADF) / 177.8 mm
(Based on 0.0112mm/mm)
Registration
Left Print Position
(scanning direction)
± 2.5 mm (±3.0 mm, Duplex)
Top Print Position
(feeding direction)
± 3.0 mm (±3.0 mm, Duplex)