WorkCentre 3210/3220 Multifunction Printer Service Manual 1-9
General Information
Printer Options
The WorkCentre 3210/3220 printer options include:
■ Additional RAM (256 MB)
■ Optional Tray Assembly (Tray 2)
Additional RAM
The standard 128 MB memory is soldered on board. The printer features one
memory slot that supports an additional 256 MB for a maximum of 384 MB.
Memory modules must meet the following characteristics:
■ 200 Pin DDR2 DIMM (8 chip type)
■ Unbuffered, Non-parity
The printer’s Configuration page lists the amount of installed RAM.
Optional Tray Assembly
The Optional Tray increases the input capacity by 250 sheets and attaches
underneath Tray 1 using a single connector cable.
Only one Optional Tray is supported.
To Next Page
Loading...
