Xerox WORKCENTRE 3210 Service Manual

xviii WorkCentre 3210/3220 Multifunction Printer Service Manual
9. Some parameters required for compliance with Telecom’s Telepermit
requirements are dependent on the equipment (PC) associated with this
device. The associated shall be set to operate within the following limits
for compliance with Telecom’s Specifications:
For repeat calls to the same number:
■ There shall be no more than 10 call attempts to the same number
within any 30 minute period for any single manual call initiation, and
■ The equipment shall go on-hook for a period of not less than 30
seconds between the end of one attempt and the beginning of the
next attempt.
For automatic calls to different numbers:
■ The equipment shall be set to ensure that automatic calls to different
numbers are spaced such that there is no less than 5 seconds
between the end of one call attempt and the beginning of another.
10. For correct operation, total of the RN’s of all devices connected to a single
line at any time should not exceed 5.

Xerox WORKCENTRE 3210 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 24 ppm
Duplex Printing	Manual
Monthly Duty Cycle	Up to 30, 000 pages
Processor Speed	360 MHz
Memory	128 MB
Standard Paper Capacity	250 sheets
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, B5, Executive, Folio, Legal, Letter
Scan Resolution	Up to 4800 x 4800 dpi
Maximum Paper Size	8.5 x 14 in (Legal)
Operating System Compatibility	Windows, Mac OS
Print Resolution	600 x 600 dpi