ADVANTEST R3765G Series

R3765/67G Series Network Analyzer Operation Manual
7.10 Software Fixture Function (OPT 71/72)
7-113
• 2 of 4 page
{PORT2 ADD CIRCUIT ON/OFF}:
Selects ON/OFF of the matching circuit function for
TEST PORT 2.
{PORT2 ADD TYPE [ ]}: Displays the matching circuit type menu (see ).
Sets the matching circuit type of TEST PORT 2.
{PORT2 CAP C}: Sets the capacitance C of TEST PORT 2.
When “0” is entered, the capacitance is assumed to be
not connected and ignored.
{PORT2 CAP G}: Sets the conductance G for the capacitance of TEST
PORT 2.
{PORT2 IND L}: Sets the inductance L of TEST PORT 2.
When “0” is entered, the inductance is assumed to be
not connected and ignored.
{PORT2 IND R}: Set the resistance R for the inductance of TEST PORT
2.
{Return}: Returns to the port condition menu.
{More 2/4}: Moves to the 3 of 4 page.
• 3 of 4 page
{PORT3 ADD CIRCUIT ON/OFF}:
Selects ON/OFF of the matching circuit function for
TEST PORT 3.
{PORT3 ADD TYPE [ ]}: Displays the matching circuit type menu (see ).
Sets the matching circuit type of TEST PORT 3.
{PORT3 CAP C}: Sets the capacitance C of TEST PORT 3.
When “0” is entered, the capacitance is assumed to be
not connected and ignored.
{PORT3 CAP G}: Sets the conductance G for the capacitance of TEST
PORT 3.
{PORT3 IND L}: Sets the inductance L of TEST PORT 3.
When “0” is entered, the inductance is assumed to be
not connected and ignored.
{PORT3 IND R}: Set the resistance R for the inductance of TEST PORT
3.
{Return}: Returns to the port condition menu.
{More 3/4}: Moves to the 4 of 4 page.
7
7