FuelsManager Defense
122 Administrator Manual
GAUGING
SETUP - HYBRID
This option configures the tank to use Hybrid tank gauging
techniques
PRESSURE
TRANSMITTER
SETUP - TOP
These parameters define the position and offset for the Top
pressure transmitter in Hydrostatic/Hybrid tank calculations
PRESSURE
TRANSMITTER
SETUP - MIDDLE
These parameters define the position and offset for the
Middle pressure transmitter in Hydrostatic/Hybrid tank
calculations
PRESSURE
TRANSMITTER
SETUP -
BOTTOM
These parameters define the position and offset for the
Bottom pressure transmitter in Hydrostatic/Hybrid tank
calculations
MINIMUM LEVEL This parameter defines the lowest level of which Hydrostatic/
Hybrid tank calculations can be performed
DENSITY
DEADBAND
This parameter defines the minimum change in density that
will cause the Hydrostatic/Hybrid tank calculations to be
executed
USE LOCAL
GRAVITY
Enable the entry of the Earth’s gravity, in m/sec
2
, at the
tank’s specification. Used in Hydrostatic/Hybrid calculations
ELEVATION Defines the elevation above sea level at the tanks specific
location, used in Hydrostatic/Hybrid calculations
LATITUDE Defines the Latitude (in deg, mins, & sec) at the tanks
specific location, used in Hydrostatic/Hybrid calculations
LEVEL OFFSET Defines the offset value to be applied to the Level calculation
as part of the Hydrostatic calculations
Edit Tank Data dialog box - Vessel 1 tab
To Next Page
Loading...