Creating and editing tank points
ADM003GVAE1005 121
SHELL
THICKNESS
This field allows the user to configure the thickness of the
sphere's shell. Used in the LPG calculation method
LINING
MATERIAL
This field allows the configuration of the type of tank lining
material. For reporting and information only
DATE
INSTALLED
This field allows the configuration of the date the tank was
installed or build. For reporting and information only
TANK MATERIAL This field allows the user to configure the material from
which the tank shell is constructed. This field is only
available if the Enable Correction option is checked. Used in
tank shell correction calculation
EXP COEF This field allows the user to configure the material expansion
coefficient used in the tank shell correction calculations.
Manual entry of this value is not allowed except when the
Tank Material is set to 'Other.’ Used in tank shell correction
calculation
INSTALL TEMP This field allows the configuration of the ambient
temperature when the tank was installed or built
CATHODIC
PROTECTION
This field denotes that the tank is fitted with cathodic
protection. Used for reporting and information only
OVERFILL
PROTECTION
This field denotes that the tank is fitted with overfill
protection. Used for reporting and information only
SPILL
PROTECTION
This field denotes that the tank is fitted with spill protection.
Used for reporting and information only
ENABLE (TANK
SHELL
CORRECTION)
This field allows the user to enable the compensation of the
Net Std. volume for the thermal expansion effects of the tank
shell
SHELL
INSULATION
This field allows the user to configure the tank shell
correction method to use the insulated tank correction
equation. This field is only available if the Enable Correction
option is checked
AREACOEF This field allows the user to configure the shell area
expansion coefficient used in the tank shell correction
calculations. Manual entry of this value is not allowed except
when the Tank Material is set to 'Other'
GAUGING
SETUP -
TRADITIONAL
This option configures the tank to use traditional level tank
gauging techniques
GAUGING
SETUP -
HYDROSTATIC
This option configures the tank to use Hydrostatic tank
gauging techniques
Edit Tank Data dialog box - Vessel 1 tab
To Next Page
Loading...