FuelsManager Defense
286 Administrator Manual
Inventory Management recognizes that the measured product level is below that
of the bottom point in the product table, so it uses the top of the water table to
extend the range:
• From the water table +1ft [+2ft (top) minus +1ft (measured water level)] =
1000 gal
• Total product volume for +5ft of product and +1ft of water = 6000 gal
From the water table +1ft of water = 1000 gal
Example 2
Water level higher than the top point in the water table:
Example 2 shows how
the product and water
volumes are calculated
when the water level is
higher than the top
point in the water table
• Measured product level = +5ft
• Measured water level = +3ft
From the product table the product volume = 5000 gal
Inventory Management recognizes that the measured water level is above that of
the top point in the water table, so it uses the bottom of the product table to extend
the range:
• From the water table +2ft of water = 2000 gal
• From the product table +1ft of water = 1000 gal
• Total water volume for + 3ft of water = 3000 gal
Product Table Water Table
Product Level Product Vol Water Level Water Vol
0000
1ft 1000 gal 1ft 1000 gal
2ft 2000 gal 2ft 2000 gal
5 ft 5000 gal
20 ft 20,000 gal
To Next Page
Loading...