Scaling and engineering units data
ADM003GVAE1005 363
FLOW MININIUM - TANK MINIMUM FLOW SCALING
This variable is the minimum range for the tank flow process variable. This variable can be viewed from the
Operate interface but cannot be modified
FLOW MAXIMIUM - TANK MAXIMUM FLOW SCALING
This variable is the maximum range for the tank flow process variable. This variable can be viewed from the
Operate interface but cannot be modified
FLOW UNITS - FLOW ENGINEERING UNITS
This variable is the engineering units for the tank flow process variable. This variable can be viewed from the
Operate interface but cannot be modified
PRESS. VAPOR MININIUM - TANK MINIMUM VAPOR PRESSURE SCALING
This variable is the minimum range for the tank vapor pressure process variable. This variable can be viewed
from the Operate interface but cannot be modified
PRESS. VAPOR MAXIMIUM - TANK MAXIMIUM VAPOR PRESSURE SCALING
This variable is the maximum range for the tank vapor pressure process variable. This variable can be viewed
from the Operate interface but cannot be modified
PRESS VAPOR UNITS - VAPOR PRESSURE UNITS
This variable is the engineering units for the tank vapor pressure process variable. This variable can be viewed
from the Operate interface but cannot be modified
LEVEL RATE MININIUM - TANK MINIMUM LEVELRATE SCALING
This variable is the minimum range for the tank level change rate process variable. This variable can be viewed
from the Operate interface but cannot be modified
LEVEL RATE MAXIMIUM - TANK MAXIMIUM LEVELRATE SCALING
This variable is the maximum range for the tank level change rate process variable. This variable can be viewed
from the Operate interface but cannot be modified
LEVEL RATE UNITS - RATE OF LEVEL CHANGE UNITS
This variable is the engineering units for the tank level change rate process variable. This variable can be
viewed from the Operate interface but cannot be modified
MASS FLOW MININIUM - TANK MINIMUM MASS FLOW SCALING
This variable is the minimum range for the tank mass flow process variable. This variable can be viewed from
the Operate interface but cannot be modified
MASS FLOW MAXIMIUM - TANK MAXIMUM MASS FLOW SCALING
This variable is the maximum range for the tank mass flow process variable. This variable can be viewed from
the Operate interface but cannot be modified
Scaling and Engineering Units Data
To Next Page
Loading...