NAVIGATING THE MENU STRUCTURE
OVERVIEW OF USER AND ADMIN LEVELS
96 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Overview of user and admin levels
There are two levels of access to information in the user interface of the control point:
user and admin. You can change which entries the user can see and edit by applying
access rights to the profile in TPS.
Related links:
Overview of access rights on page 262
User level
User level is the lowest access level, and typically the level at which the transceiver is
operated. When you power up the transceiver, it enters user level. User level is
indicated by the absence of an admin level indicator to the left of the navigation
indicator in the menu bar.
Figure 25: User level (no admin level indicator)
The user should be able to access all necessary information for the day-to-day
operation of the transceiver at this level.
Admin level
Admin level is for use by system administrators and is indicated by the presence of
the admin level indicator in the menu bar. To access this level, you must log in using
the admin PIN set up by your system administrator.
NOTE: By default, logging in to admin level also shows the advanced view of
the user interface at the control point.
Figure 26: Admin level
Entries that have been locked and/or hidden at admin level have an admin level
indicator at the right of the field and may only be edited at admin level.
admin level
indicator
advanced view
indicator
To Next Page
Loading...
Need help?
General
