SETTINGS
SETTINGS > CALLING > GENERAL
ENVOY™ TRANSCEIVER REFERENCE MANUAL 237
Respond OTA
The Respond OTA entry sets the way in which the transceiver handles its response
to an OTA command sent through an ALE/CALM or Selcall HF network.
If you want to:
• respond to an OTA command regardless of the privacy mode of the HF network
through which the call was made, select Always respond
• respond in a proprietary Codan-encoded format to an OTA command in an HF
network with the privacy mode set to Group or None, select To Codan
requests
• respond to an OTA command from another Codan HF transceiver in an HF
network with the privacy mode set to Group and a common privacy key, select
To encrypted requests
• disable your response to any OTA command, select Never respond
Default value: To Codan requests
NOTE: The To Codan requests value specifically excludes calls made
using an Open Selcall HF network, and calls made using an
ALE/CALM HF network with a privacy mode of Plain
(MIL-STD-188-141B ALE option).
NOTE: To respond to Get Status calls made in an Open Selcall HF network,
the Respond OTA entry must be set to Always respond.
For more information on OTA commands contact your Codan representative.
To Next Page
Loading...
Need help?
General
