ENCRYPTION
SETTING UP ENCRYPTION
330 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Setting up encryption
Related links:
Setting user access to encryptor features on page 330
Enabling encryptor selection on page 331
Enabling a hot-key sequence for erasing secure keys on page 332
Setting the encryptor to be secure at all times on page 333
Setting the secure state of scrambler/encryptors at power up on page 334
Viewing the COM port setting in VCOM on page 303
Setting user access to encryptor features
You can select the features that you want to allow the user to perform, or you can
prevent access to these features.
The user may be given access to:
• select a secure index that contains a key, or a select a code
• edit just the first key, or any of the keys in the secure indexes
• erase one or all of the secure keys and indexes
To select the features that you want the user to be able to perform:
1 From the main menu, select (Settings), then (Security).
1 Press or to scroll to the Secure User Access entry.
1 Press .
1 Press or to scroll to the value that you want to set, then press OK to select
the check box.
To Next Page
Loading...
Need help?
General
