ACCESS RIGHTS
OVERVIEW OF ACCESS RIGHTS
262 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Overview of access rights
Access to information in the transceiver can be restricted in two ways: locked and/or
hidden. Using TPS, you can lock entries to prevent them from being edited, and you
can hide them to prevent them from being shown, and therefore edited, at user level.
You may also lock and/or hide individual entries, or you can lock and/or hide each
top-level menu (Channels, Scan Tables, etc). This access information is saved in the
profile, and the profile is programmed to the transceiver.
NOTE: You cannot change these access rights from the control point of the
transceiver.
The access rights that are set at admin level affect how an item is viewed and edited
at user level. Access rights may also be applied at the factory level. You do not have
access to factory level.
NOTE: Items that are locked from editing at the current level have a padlock
indicator ( ).
Related links:
Menu structure on page 90
Logging in to admin level on page 97
Overview of basic and advanced views on page 94
Access right Description
AL Items locked at admin level may be viewed at user level,
but not edited.
These items may be viewed and edited at admin level.
AH Items hidden at admin level cannot be viewed at user level,
and although not locked, cannot be edited.
These items may be viewed and edited at admin level.
FL Items locked at factory level may be viewed at admin and
user levels, but not edited.
To Next Page
Loading...
Need help?
General
