OPERATING THE TRANSCEIVER
CALLING
46 ENVOY™ TRANSCEIVER REFERENCE MANUAL
1 If prompted, press or to scroll to the channel that you want to use, then
press CALL.
A is shown next to the currently selected channel/mode.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate that the call has
been successful.
Related links:
Adding a contact on page 163
Making a call from the Call History
The Envoy™ Transceiver stores information on the calls that you send and receive.
The detailed call history is accessed by holding CALL, then pressing to scroll to the
Call History tab.
NOTE: The default behaviour for the CALL key is to press it to start a call, or
hold it to see your Contacts/Call History.
NOTE: A filtered Call Log is available in the call screen. This log contains only
the latest instance of a call to and from a specific station.
To make a call from the Call History:
1 Hold CALL.
1 Press or to select the Call History tab.
1 Press or to scroll to the call that you want to return or repeat, then
press CALL.
1 If you want to view the details of the call, press (Options), scroll to
Details, then press (Select).
Press (Close) to exit from the call details.
1 Press CALL.
1 Press or to select the call type that you want to use.
1 Continue from making your chosen call type.
To Next Page
Loading...
Need help?
General
