OPERATING THE TRANSCEIVER
USING GPS
E
NVOY™ TRANSCEIVER REFERENCE MANUAL 75
Viewing GPS information
NOTE: You can view GPS information if the GPS Call option is installed. GPS
information may be provided via a connected GPS receiver or data
entered into Settings > GPS > My Position.
To view GPS information:
1 From the main menu, select (General), then (GPS).
1 Press to move to the tab that you want to view.
NOTE: The Signal Strength and Satellites Constellation tabs are
available only when a GPS receiver is used to provide the GPS
information.
Table 2: GPS information
Tab Description
Latitude and longitude readings from a GPS receiver, or from
Settings > GPS > My Position. Altitude and speed readings are
hidden by default. The spinning circle shows that the GPS receiver
is active, and the Last Fix reading shows the time lapse from the last
receipt of valid GPS information.
Distance and bearing from your location to a selected waypoint.
Signal strength from each visible satellite. The number represents a
particular satellite, and its location is shown on the Satellites
Constellation tab. Satellites with a blue signal strength provide
information for the GPS location.
To Next Page
Loading...
Need help?
General
