Codan Envoy - Setting the Encryptor to be Secure at All Times

ENCRYPTION
SETTING UP ENCRYPTION
ENVOY™ TRANSCEIVER REFERENCE MANUAL 333
When the check box is selected, the item is enabled. When the check box is
clear, the item is disabled.
1 Press (Save) to save the information.
1 Press (Close).
Related links:
Deleting a secure key on page 328
Logging in to admin level on page 97
General Options on page 256
Setting the encryptor to be secure at all times
If you want the encryptor to be in secure mode at all times, enable this feature.
To set the encryptor to constant secure mode:
1 From the main menu, select (Settings), then (Security).
1 Press or to scroll to the General Options entry.
1 Press .
1 Press or to scroll to the Always secure value, then press OK to select the
check box.