NAVIGATING THE MENU STRUCTURE
FINDING A WORD OR VALUE
ENVOY™ TRANSCEIVER REFERENCE MANUAL 99
Finding a word or value
The quickest way to find an entry or a value in the user interface of the control point
is to use the Find function, which is available via the key when the highlighted
icon contains submenus or lists of entries. The feature searches for the sequence of
characters (letters, numbers, or a combination of both) that you enter.
NOTE: The Find function only searches on words and values that are visible to
the operator at the current view and level of access.
Figure 28: Find function
To find a word or value:
1 Highlight the icon that represents the highest level in which you want to search,
then press (Find).
NOTE: If you select the icon by pressing OK, you will enter that menu
level. If you do not want to search at the lower level, press
(Close) to return to the higher level, then press (Find)
again.
1 Enter the letter or number on which you want to search.
Any entries or values that contain the character you have entered are shown in
a list, with the character highlighted.
To Next Page
Loading...
Need help?
General
