NETS
WORKING WITH NETS
ENVOY™ TRANSCEIVER REFERENCE MANUAL 183
Working with NETs
Related links:
Entries for a NET on page 178
Overview of NETs on page 176
Navigating the menu structure on page 92
Entering text in a field on page 103
Selecting a value from a list on page 107
Saving your changes on page 111
Adding a NET
A NET provides the relationship between the members of a NET, the NET address,
and the HF network used for communication.
To add a NET:
1 From the main menu, select (User Data), then (NETs).
1 Do one of the following:
• If there are no NETs programmed in the transceiver, press (Add).
• If there are some existing NETs programmed in the transceiver, scroll to
the NET after which you want to add the new NET, press (Options),
scroll to Add, then press (Select) to add a NET.
1 Enter the name that you want to use for the NET.
1 Press to move to the Address entry.
1 Enter the address that you want to use for the NET.
You can enter up to 15 upper-case/numeric characters, or a combination of both.
1 Press to move to the HF Network entry.
1 Press or to select the HF network that you want to use.
1 Press to move to the NET Members entry.
1 To add NET members:
•Press.
•Press (Options), scroll to Add, then press (Select).
• Enter the address of the NET member.
• Continue adding members.
•Press (Options), scroll to Save, then press (Select).
1 Press to move to the Out Calls entry.
To Next Page
Loading...
Need help?
General
