Codan Envoy - Selecting;Deselecting a Check Box; Figure 34: Entry with a Check Box

NAVIGATING THE MENU STRUCTURE
SELECTING/DESELECTING A CHECK BOX
108 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Selecting/deselecting a check box
There are some entries in the menu structure that require you to enable or disable a
particular feature via a check box. When the check box contains a tick ( ), the feature
is enabled. When the check box is clear ( ), the feature is disabled.
Figure 34: Entry with a check box
To select or deselect a check box:
1 Highlight the entry.
1 Press OK to toggle the check box as selected or deselected.
When the check box is selected, the item is enabled. When the check box is
clear, the item is disabled.
1 Press (Save) to save the information.