CONTACTS
WORKING WITH CONTACTS
ENVOY™ TRANSCEIVER REFERENCE MANUAL 163
Working with contacts
Related links:
Entries for a contact on page 160
Call types on page 434
Navigating the menu structure on page 92
Entering text in a field on page 103
Selecting a value from a list on page 107
Selecting/deselecting a check box on page 108
Saving your changes on page 111
Group calls in a Codan Selcall HF network on page 452
Adding a contact
Contacts are used to pre-define the typical calls that you want to make to another
person or organisation, and calls that are made to an emergency contact when the
key is held for 2 sec. You can define a number of calls for each contact. Each call
contains information about:
• the call system that you want to use
• the type of call that you want to make to the contact
• the address (or telephone number) of the station at which this contact may be
located
NOTE: You can select some of the call information to prompt you for a choice
at the time that a call is made via the contact. The Prompt value is
available in these instances.
To add a contact:
1 From the main menu, select (User Data), then (Contacts).
1 Select (Contacts) or (Emergency Contacts), as required.
1 Press (Add).
To Next Page
Loading...
Need help?
General
