PERIPHERALS
ENTRIES FOR A PERIPHERAL
ENVOY™ TRANSCEIVER REFERENCE MANUAL 197
Entries for a peripheral
Related links:
RFU 15way Mode on page 197
RFU 15way Speed on page 198
RFU 15way Startup on page 198
RFU Average ALC on page 198
RFU ALC Rate on page 198
RFU Audio Type on page 198
RFU AGC on page 199
RFU PTT Beep on page 199
RFU Mute Extend on page 199
RFU Mute Off After PTT on page 199
RFU Sidetone Volume on page 200
RFU Secure Audio on page 200
RFU Quiet Line on page 200
RFU 15way MIL/STANAG 2G Data Interface on page 200
RFU 15way 2.4 kbit/s Data Modem Interface on page 201
RFU 6way Mode on page 201
RFU 6way Speed on page 201
RFU 6way Startup on page 201
RFU 6way MIL/STANAG 2G Data Interface on page 202
RFU 15way Mode
The RFU 15way Mode entry sets the mode in which the RS232 15-way serial port
operates. This entry is only available if you are setting up the 15-way connector on the
RFU for a user-defined peripheral device.
If the port is:
• not in use, select None
• receiving GPS information, select GPS
• controlling and monitoring the transceiver, select CICS
• connected to a modem, select Data
• connected to a radio/telephone interconnect unit, select 3033
Default value: None
To Next Page
Loading...
Need help?
General
