SETTINGS
SETTINGS > CONFIGURATION > GENERAL
224 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Units
The Units entry sets the default system of units for temperature and distance
measurements.
Available values: Metric, Imperial
Default value: Metric
Abandon Mode
The Abandon Mode entry sets how the transceiver shuts down following the +
hot-key sequence.
If you want the transceiver to:
• not respond to the abandon hot-key sequence, select Never
• shut down and only be accessed by an administrator (if an admin PIN is set),
select Lock
• erase all CES secure keys, AES secure keys, channels, HF networks, NETs,
phone links, contacts, self addresses, call logs, messages, welcome text, site
manager information, and LQA information, then admin lock, select Erase
Default value: Never
Command Line
The Command Line entry is for future use.
RFU Logging
The RFU Logging entry sets whether or not debug logging is enabled on the RFU.
Default value: Disabled
To Next Page
Loading...
Need help?
General
