ENCRYPTION
SETTING UP ENCRYPTION
ENVOY™ TRANSCEIVER REFERENCE MANUAL 331
When the check box is selected, the item is enabled. When the check box is
clear, the item is disabled.
You can select multiple values.
1 Press (Save) to save the information.
1 Press (Close).
Related links:
Logging in to admin level on page 97
Secure User Access on page 255
Enabling encryptor selection
If you want the user to be able to select the type of encryptor at the time of use, enable
this feature. When enabled, the user will be able to select the encryptor by
holding SEC, or via Functions > Secure Info (2221 only).
To enable encryptor selection:
1 From the main menu, select (Settings), then (Security).
1 Press or to scroll to the General Options entry.
1 Press .
1 Press or to scroll to the Allow user to select encryptor type value,
then press OK to select the check box.
To Next Page
Loading...
Need help?
General
