Codan Envoy Reference Manual

SETTINGS
SETTINGS > CALLING > ALE
E
NVOY™ TRANSCEIVER REFERENCE MANUAL 247
ALE Hangup ALL Call
The ALE Hangup ALL Call entry sets whether or not the initiator of an ALL call
can hang up the call to all linked stations.
During an ALL call, a link is established implicitly without the called stations
responding to the calling station. When the ALE Hangup ALL Call entry is set to
Enabled, the calling station sends a link termination sequence when SCAN is
pressed. All stations that entered the link hang up the link and return to scanning when
they receive this sequence.
Default value: Enabled
ALE Hangup Phone Call
The ALE Hangup Phone Call entry sets whether or not a member of an ALE link
to an automated radio/telephone interconnect unit sends a link termination sequence
when SCAN is pressed.
During any ALE Phone call, a link is established between the calling station and the
station with an automated radio/telephone interconnect unit, for example, a Codan
3033 Telephone Interconnect. When the ALE Hangup Phone Call entry is set to
Enabled, all stations receive a link termination sequence when SCAN is pressed at
one of the stations. All stations that entered the link hang up the link and return to
scanning when they receive this sequence. This value may be required in ALE/CALM
HF networks with an automatic interconnect unit.
If the ALE Hangup Phone Call entry is set to Disabled, a link termination
sequence is not sent when SCAN is pressed at any of the stations in the link. In this
case, a hangup sequence must be sent separately to the radio/telephone interconnect
unit to clear the telephone line, or it hangs up after a timeout period.
Default value: Enabled
ALE Hangup Voice Call
The ALE Hangup Voice Call entry sets whether or not a member of an ALE link
sends a link termination sequence when SCAN is pressed.
During any ALE call, a link is established between the calling and called stations.
When the ALE Hangup Voice Call entry is set to Enabled, all stations receive a
link termination sequence when SCAN is pressed at one of the stations. All stations
that entered the link hang up the link and return to scanning when they receive this
sequence.
If the ALE Hangup Voice Call entry is set to Disabled, a link termination
sequence is not sent when SCAN is pressed at any of the stations in the link. In this
case, only this station ends its link.
Default value: Enabled

Codan Envoy Specifications

General

Brand	Codan
Model	Envoy
Category	Transceiver
Language	English