Name: Codan Envoy
Brand: Codan
Rating: 4 (1 reviews)

To Next Page

To Previous Page

CALL TYPES AND FEATURES

CALL TYPES

ENVOY™ TRANSCEIVER REFERENCE MANUAL 441

If you have the MIL-STD-188-141B ALE option installed and the ALE Selective

Message entry set to Enabled, you are able to send a message with the call. You

are prompted to attach a message when you send the call. You must use an

ALE/CALM HF network to make the call.

Related links:

Making a Selective call on page 48

Group calls in a Codan Selcall HF network on page 452

ALE address syntax on page 442

ALE Selective Message on page 249

Using multiple addresses for calls in an ALE/CALM HF network on page 453

Send Position call

NOTE: You can make a Send Position call if the GPS Call option is installed,

and your GPS information is valid.

If you want to send your GPS information to another station, make a Send Position

call.

NOTE: The transceiver sends GPS information from either a connected GPS

receiver (selected as a peripheral device), or from valid content in

Settings > GPS > My Position.

NOTE: When GPS information is sent via a Selcall HF network, the altitude is

shown as --.

Send Position calls can be made to several stations at once. If you have the

FED-STD-1045 ALE/CALM option installed, you can use the global ALL address

syntax (@?@) with the Send Position call type to send a position to a group of stations

using an ALE/CALM HF network. If you have the MIL-STD-188-141B ALE option

installed, you can use the ALL, ANY, Group Selective, NET, or Wildcard address

syntax with the Send Position call type to send a position to a group of stations using

an ALE/CALM HF network.

Send Position calls are automatically answered by any called stations so an operator

is not required to take any action. If you make a Send Position call, the link terminates

immediately after the GPS position is sent. GPS positions you send are stored in the

Call History.

Codan Envoy Reference Manual

Other manuals for Codan Envoy