OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER REFERENCE MANUAL 57
Related links:
Phone call on page 440
Entering text in a field on page 103
Using multiple addresses for calls in an ALE/CALM HF network on page 453
Group calls in a Codan Selcall HF network on page 452
Making a Send Position call
If you want to send your GPS information to another station, make a Send Position
call.
NOTE: You can make a Send Position call if the GPS Call option is installed,
and your GPS information is valid. The transceiver sends GPS
information if you have a GPS receiver connected and configured, or
from valid content in Settings > GPS > My Position.
NOTE: When GPS information is sent via a Selcall HF network, the altitude is
shown as --.
To make a Send Position call:
1 Press CALL.
The call type and address of the last call are shown at the top of the call screen.
The filtered call log below this shows the latest instance of any call type made
to or received from a particular address.
1 If you do not want to use the HF network shown at the top right of the screen:
•Press (Options).
• Scroll to HF Networks, then press (Select).
• Scroll to the HF network that you want to use, then press OK.
1 Press or to select the Send Position call type if it is not selected.
To Next Page
Loading...
Need help?
General
