HF NETWORKS
WORKING WITH HF NETWORKS
ENVOY™ TRANSCEIVER REFERENCE MANUAL 147
Working with HF networks
Related links:
Entries for an HF network on page 142
Overview of HF networks on page 140
Overview of scan tables on page 128
Navigating the menu structure on page 92
Entering text in a field on page 103
Selecting a value from a list on page 107
Selecting/deselecting a check box on page 108
Saving your changes on page 111
Group calls in a Codan Selcall HF network on page 452
Adding an HF network
An HF network provides a relationship between the call system, self address and scan
tables.
To add an HF network:
1 From the main menu, select (User Data), then (HF Networks).
1 Do one of the following:
• If there are no HF networks programmed in the transceiver, press
(Add).
• If there are some existing HF networks programmed in the transceiver,
scroll to the HF network after which you want to add the new HF network,
press (Options), scroll to Add, then press (Select) to add an
HF network.
1 Enter the name that you want to use for the HF network.
1 Press to move to the Call System entry.
1 Press or to select the call system that you want to use.
1 Press to move to the Selcall|ALE Address entry.
1 Enter the self address that you want to use for calls made from and to this HF
network.
If you are entering a self address to be used in:
• a Codan Selcall HF network, enter up to 10 digits
• an ALE/CALM HF network, enter up to 15 upper-case/numeric
characters, or a combination of both
CAUTION: If you intend to send calls to a station that is compatible with
4-digit self addresses only, you must set up a 4-digit self address.
To Next Page
Loading...
Need help?
General
