CONTACTS
ENTRIES FOR A CONTACT
162 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Preferred channel
The optional preferred channel is selected from the scan table(s) associated with the
selected HF network.
NOTE: The Preferred Channel entry is not shown if a valid phone link is
selected. The preferred channel may be defined in the phone link.
Related links:
Channels on page 117
Call description
The Call Description entry enables you to enter a meaningful name for a call to
distinguish it from other calls for the same contact. By default, the Call Description
entry is filled with the call type. When you go to Contacts during the call process to
select a contact to call, you have to select the call that you want to make. The names
that appear in this selection list are the call descriptions. Each call description for a
contact must be unique.
For example, a contact may be called via two addresses using the same call type. In
this instance, the call description defaults to the same call type: Selective and
Selective 1. You can make these descriptions more meaningful by including the
address in the call description, for example, Selective 1234 and Selective 2233.
Base
The Base entry is for future use.
To Next Page
Loading...
Need help?
General
